查看硬盘参数，CPU参数温度等

您当前所在位置：首页 → 操作系统 → LINUX → 查看硬盘参数，CPU参数温度等

查看硬盘参数，CPU参数温度等 时间：2015/6/28来源：IT猫扑网作者：网管联盟我要评论(0)

1）查看硬盘参数：

hdparm /dev/hda

我的硬盘显示：

/dev/hda:

multcount = 16 (on)

IO_support = 1 (32-bit)

unmaskirq = 1 (on)

using_dma = 1 (on)

keepsettings = 0 (off)

readonly = 0 (off)

readahead = 256 (on)

geometry = 59582/16/63, sectors = 60058656, start = 0

2）查看cpu参数

cat /proc/cpuinfo

processor : 0

vendor_id : GenuineIntel

cpu family : 15

model : 1

model name : Intel(R) Pentium(R) 4 CPU 1.80GHz

stepping : 3

cpu MHz : 1800.029

cache size : 256 KB

fdiv_bug : no

hlt_bug : no

f00f_bug : no

coma_bug : no

fpu : yes

fpu_exception : yes

cpuid level : 2

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up

bogomips : 3600.05

3）查看cpu温度：

cat /proc/acpi/thermal_zone/THRM/temperature

但是有个前提条件是：

要有内核相关模块(比如I2C)支持，还要找出系统的传感器型号，然后在内核中打开相应选项。

我的可能是不满足这个前提条件，查看失败。

首先确保系统中有安装lm_sensors包，安装好后直接在终端运行sensors-detect然后一路回车就行了，系统会默认启动lm_sensors服务，之后你再在终端运行sensors命令即可，就会显示CPU温度电压型号等等。

    it87-isa-0290
    Adapter: ISA adapter
    VCore 1:   +1.71 V (min = +4.08 V, max = +4.08 V)   ALarm
    VCore 2:   +2.59 V (min = +4.08 V, max = +4.08 V)   ALarm
    +3.3V:     +3.25 V (min = +4.08 V, max = +4.08 V)   ALarm
    +5V: +5.19 V (min = +6.85 V, max = +6.85 V)   ALarm
    +12V:     +11.39 V (min = +16.32 V, max = +16.32 V)   ALarm
    -12V:     -20.00 V (min = +3.93 V, max = +3.93 V)   ALarm
    -5V: +3.33 V (min = +4.03 V, max = +4.03 V)   ALarm
    Stdby:     +5.03 V (min = +6.85 V, max = +6.85 V)   ALarm
    vbat:      +2.03 V
    fan1: 0 RPM (min =    0 RPM, div = 8)
    fan2: 0 RPM (min =    0 RPM, div = 8)
    fan3: 0 RPM (min =    0 RPM, div = 2)
    M/B Temp:    +49 C (low =    -1 C, high =    -1 C)   sensor = thermistor
    CPU Temp:    +36 C (low =    -1 C, high =    -1 C)   sensor = thermistor
    Temp3: +35 C (low =    -1 C, high =    -1 C)   sensor = diode

关键词标签：硬盘,CPU

相关阅读

文章评论

查看所有0条评论>>